| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Preparing a Scraper http://www-.luthiersforum.com/forum/viewtopic.php?f=10117&t=46477 |
Page 1 of 1 |
| Author: | James Orr [ Thu Oct 08, 2015 4:17 pm ] |
| Post subject: | Preparing a Scraper |
A satisfyingly low-tech way to prepare your scraper. This is how I've been doing it for a few years. |
|
| Author: | Alex Kleon [ Fri Oct 09, 2015 6:35 am ] |
| Post subject: | Re: Preparing a Scraper |
Thanks for sharing that, James. Mr. Ng has an easy way about him as a teacher. Alex |
|
| Author: | cablepuller1 [ Fri Oct 09, 2015 2:07 pm ] |
| Post subject: | Re: Preparing a Scraper |
Thanks great video.. now i know where im going wrong |
|
| Author: | Ruby50 [ Fri Oct 09, 2015 8:42 pm ] |
| Post subject: | Re: Preparing a Scraper |
I got the latest issue of Popular Woodworking yesterday and it has the plans to build his sharpening station. It is a way to have some water in your shop without having a sink. I use sandpaper and don't need water. His light touch is something that took me years to learn. Ed |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|